Instruction pictogram included
Label of Warning and Safety signs of use.
Main frame: 120x50x2 mm OVAL steel tube. and 100x50x2 mm. Calibrated SAE 1088 cold curved.
Aluminum weight selection needles, magnetized to prevent them from falling when performing the exercises and with a spiral cable to prevent their loss.
Steel cable, galvanized, preformed and internally self-lubricated, manufactured by extrusion, 3 mm. and nylon coated up to 5 mm. With a resistance to breakage of 907 Kg. It meets the standards MIL-DTL 83420 on flexibility and MIL-DTL 18375 on resistance to corrosion.
Pulleys: Made of FAG polypropylene, with double sealed bearings and precision ground to guarantee long cable life, smooth movement and maximum durability.
Fairing: Fairing of the towers where the weights are in ABS to improve the appearance and increase safety. The ABS components provide rigidity, mechanical resistance, resistance to chemical attacks and stability at high temperatures as well as hardness, properties highly appreciated in applications in fitness equipment. It also offers toughness at any temperature, this is especially interesting for cold environments, in the which other plastics become brittle.
Safety: Machines manufactured under standards UNE-EN 957-1, 957-2 and 957-4: 2006 + A1.
Plates / Weights: Calibrated steel. They have polyamide caps for smoother operation and avoid noise when exercising.
Load. 1 High pulley with 100 Kg. (20 of 5 kg.) 1 Low pulley with 100 Kg. (20 of 5 Kg.) Cross pulleys with one hand with 80 kg. (16 of 5 kg.) And also for Triceps and / or Biceps. Output for Triceps and / or Biceps with 80 Kg. (16 of 5 kg.)
Regulations in stainless steel.
Seats: Made of high-density foam rubber (150), with a thickness of 4 cm. and upholstered with fireproof and antibacterial skay. High pulley seat with leg adjustment.
The supports where the feet are placed are covered in polyamide polymer of great hardness, flexibility and great resistance to impacts and abrasion.
Neoprene, anti-allergic and non-slip grips.
Painting: The metal parts go through a degreasing and phosphating tunnel, then through an electrostatic paint booth and painted with polyester powder paint. It goes through an oven and passes its polymerization at 220º. Fulfilling protocol 14001 in environmental policy.